By following the instructions usage and maintenance your HOT WOK Wok pan will have a longer service life.
The warranty will be repealed if these instructions are not followed.
Usage for Wok pan from HOT WOK:
since the Hot Wok gas burners can generate up to 4.5kWh, 7.0kWh and 12.0kWh in heating effect, it is important to use oil with a high flash point. We therefore recommend that you see peanut oil or sunflower seed oil.
- The HOT WOK Wok pan is protected by a coating, which must be burned off before use. The Hot Wok pan is made from carbon steel - an excellent material for heat distribution. Heat up your Hot Wok pan until it the colour changes to dark.
- pour 3-6 tablespoons of oil into the HOT WOK Wok pan and distribute the oil with circular motions for 2 min. It is important that the oil is applied to all areas of the inner surface. Turn off the gas burner and wipe of the pan with a paper towel. Repeat the procedure three times, until there is no residue left on the paper towel.
- Clean the HOT WOK Wok pan thoroughly with warm water and a soft sponge, before use. Wipe it dry before cooking.
After preparation, your HOT WOK Wok pan will have changed colour from shiny metal to a darker nuance. This is normal and indication that preparation has been done correctly.
Over time, the HOT WOK Wok pan will become even darker.
The dark layer acts as a non-stick surface. Your Hot Wok pan can easily keep cooked food warm. Leave the Hot Wok pan on the gas burner or place it on a dish mat.
Be aware that the HOT WOK Wok pan is still very hot when serving.
We hope that you will enjoy your HOT WOK Wok pan.
On www.hotwok.com you can find the entire HOT WOK assortment, recipes and tips for cooking.
If you have any questions or need more more information write to us at email@example.com