Skip to content
HOW TO: Mount a 29 mBar Gas regulator on a Gas cylinder

HOW TO: Mount a 29 mBar Gas regulator on a Gas cylinder

How do I mount a 29 mBar Gas regulator on gas cylinder? Look at this video to simply mount the Gas regulator.

There are many different regulators.
Always remember to check which one fits your cylinder or standard in the country. You are always welcome to email us at hotwok@hotwok.com for help. 

 

Previous article Unboxing HOT WOK SILVER LINE 4.5 kW
Next article Does your wok not burn correctly?

If you did not find what you are looking for

Search here or contact us at hotwok@hotwok.com

More FAQs

  • HOW TO: Maintenance of TOP LINE Table

    HOW TO: Maintenance of TOP LINE Table

    Has your worktop become dull and dull looking on the surface? Maybe your table is full of grease stains and hard to get clean? Here's a little trick to make it look "like new" again. Wipe the surface well with...

    Read now
  • Correctly location of burner ring - Silver Line

    Correctly location of burner ring - Silver Line

    Will your Silver Line not turn on? It is important that the burner ring has the correct location.  1. It is important that the large burner ring is placed correctly with BEST by 9.00 o’clock. 2. The lower aluminum ring is placed so that...

    Read now
  • Unboxing HOT WOK SILVER LINE 4.5 kW

    Unboxing HOT WOK SILVER LINE 4.5 kW

    Here you see the Unboxing of a HOT WOK Silver Line 4,5 kW Always remember to read the user manual which is included. Remove the flamingo and other transport protection from the box. Pay attention to many small parts and...

    Read now