Skip to content
HOW TO: Maintenance of your Paella Pan

HOW TO: Maintenance of your Paella Pan

By following the instructions usage and maintenance your HOT WOK Paella Pan will have a longer service life.

The warranty will be repealed if these instructions are not followed.

Usage for Paella Pan from HOT WOK:

since the Hot Wok gas burners can generate up to 4.5 kW, 7 kW and 12 kW in heating effect, it is important to use oil with a high flash point. We therefore recommend that you see peanut oil or sunflower seed oil.

  1. The HOT WOK Paella Pan is protected by a coating, which must be burned off before use. The Hot Wok pan is made from carbon steel - an excellent material for heat distribution. Heat up your HOT WOK Paella Pan until it the colour changes to dark.
  1. pour 3-6 tablespoons of oil into the HOT WOK Paella Pan and distribute the oil with circular motions for 2 min. It is important that the oil is applied to all areas of the inner surface. Turn off the gas burner and wipe of the pan with a paper towel. Repeat the procedure three times, until there is no residue left on the paper towel.
  1. Clean the HOT WOK Paella Pan thoroughly with warm water and a soft sponge, before use. Wipe it dry before cooking.

After preparation, your HOT WOK Paella Pan will have changed colour from shiny metal to a darker nuance. This is normal and indication that preparation has been done correctly.

Over time, the HOT WOK Paella Pan will become even darker.

The dark layer acts as a non-stick surface. Your HOT WOK Paella Pan can easily keep cooked food warm.

Leave the HOT WOK Paella Pan on the gasstove or place it on a dish mat.

Be aware that the HOT WOK Paella Pan is still very hot when serving.

 

We hope that you will enjoy your HOT WOK Wok pan.
On www.hotwok.com you can find the entire HOT WOK assortment, recipes and tips for cooking.

If you have any questions or need more more information write to us at hotwok@hotwok.com

Previous article Does your wok not burn correctly?
Next article HOW TO: Maintenance of your wok pan

If you did not find what you are looking for

Search here or contact us at hotwok@hotwok.com

More FAQs

  • HOW TO: Maintenance of TOP LINE Table

    HOW TO: Maintenance of TOP LINE Table

    Has your worktop become dull and dull looking on the surface? Maybe your table is full of grease stains and hard to get clean? Here's a little trick to make it look "like new" again. Wipe the surface well with...

    Read now
  • Correctly location of burner ring - Silver Line

    Correctly location of burner ring - Silver Line

    Will your Silver Line not turn on? It is important that the burner ring has the correct location.  1. It is important that the large burner ring is placed correctly with BEST by 9.00 o’clock. 2. The lower aluminum ring is placed so that...

    Read now
  • Unboxing HOT WOK SILVER LINE 4.5 kW

    Unboxing HOT WOK SILVER LINE 4.5 kW

    Here you see the Unboxing of a HOT WOK Silver Line 4,5 kW Always remember to read the user manual which is included. Remove the flamingo and other transport protection from the box. Pay attention to many small parts and...

    Read now